ch3
,Student:
,1. The use of predetermined overhead rates in a job-order cost system makes it possible to estimate the total cost of a given job as soon as production is completed.
True False
2. A job cost sheet is used to accumulate costs charged to a job. True False
3. The following journal entry would be made to apply overhead cost to jobs in a job-order costing system: True False
,4. Under a job-order cost system the Work in Process account is debited with the cost of materials purchased. True False
5. The process of assigning overhead cost to jobs is known as overhead application. True False
6. The cost of a completed job in a job-order costing system typically consists of the actual direct materials cost of the job, the actual direct labor cost of the job, and the actual manufacturing overhead cost of the job.
True False
7. A debit balance in the Manufacturing Overhead account at the end of the year means that manufacturing overhead is overapplied.
True False
8. Period costs are expensed as incurred, rather than going into the Work in Process account. True False
9. Advertising costs should be charged to the Manufacturing Overhead account. True False
10. When a job has been completed, the goods are transferred from the production department to the finished goods warehouse and the journal entry would include a credit to Work in Process.
True False
11. Underapplied or overapplied manufacturing overhead represents the difference between actual overhead costs and applied overhead costs.
True False
12. Top management salaries should not go into the Manufacturing Overhead account. True False
13. If manufacturing overhead applied exceeds the actual manufacturing overhead costs of the period, then manufacturing overhead is overapplied.
True False
14. In computing its predetermined overhead rate, Marple Company inadvertently left its indirect labor costs out of the computation. This oversight will cause:
A. Manufacturing Overhead to be overapplied.
B. The Cost of Goods Manufactured to be understated.
C. The debits to the Manufacturing Overhead account to be understated. D. The ending balance in Work in Process to be overstated.
15. Which of the following is the correct formula to compute the predetermined overhead rate?
A. Estimated total units in the allocation base divided by estimated total manufacturing overhead costs. B. Estimated total manufacturing overhead costs divided by estimated total units in the allocation base. C. Actual total manufacturing overhead costs divided by estimated total units in the allocation base.
D. Estimated total manufacturing overhead costs divided by actual total units in the allocation base.
16. Which of the following would probably be the least appropriate allocation base for allocating overhead in a highly automated manufacturer of specialty valves?
A. Machine-hours
B. Power consumption
C. Direct labor-hours
D. Machine setups
17. What document is used to determine the actual amount of direct labor to record on a job cost sheet? A. Time ticket
B. Payroll register
C. Production order
D. Wages payable account
18. A proper journal entry to close overapplied manufacturing overhead to Cost of Goods Sold would be: A.
B.
C. D.
19. In a job-order costing system, direct labor cost is ordinarily debited to: A. Manufacturing Overhead.
B. Cost of Goods Sold. C. Finished Goods.
D. Work in Process.
20. In a job-order costing system, the use of direct materials that have been previously purchased is recorded as a debit to:
A. Raw Materials inventory. B. Work in Process inventory.
C. Finished Goods inventory. D. Manufacturing Overhead.
21. The journal entry to record the incurrence of indirect labor costs is: A.
B. C.
D.
22. Which of the following accounts is debited when direct labor is recorded? A. Work in process
B. Salaries and wages expense C. Salaries and wages payable D. Manufacturing overhead
23. The balance in the Work in Process account equals: A. the balance in the Finished Goods inventory account. B. the balance in the Cost of Goods Sold account.
C. the balances on the job cost sheets of uncompleted jobs.
D. the balance in the Manufacturing Overhead account.
24. In a job-order costing system, indirect materials that have been previously purchased and that are used in production are recorded as a debit to:
A. Work in Process inventory.
B. Manufacturing Overhead. C. Finished Goods inventory. D. Raw Materials inventory.
25. Martinez Aerospace Company uses a job-order costing system. The direct materials for Job #045391 were purchased in July and put into production in August. The job was not completed by the end of August. At the end of August, in what account would the direct material cost assigned to Job #045391 be located?
A. Raw materials inventory
B. Work in process inventory
C. Finished goods inventory
D. Cost of goods manufactured
26. Which terms will make the following statement true? When manufacturing overhead is overapplied, the Manufacturing Overhead account has a balance and applied manufacturing overhead is greater than manufacturing overhead.
A. debit, actual
B. credit, actual
C. debit, estimated
D. credit, estimated
27. Which of the following is correct with respect to closing out overapplied manufacturing overhead to Cost of Goods Sold versus closing it out to Cost of Goods Sold and Finished Goods and Work in Process inventories? A. The balance in the Work in Process account after allocation will be higher if the overapplied manufacturing overhead is closed out by allocating it to all appropriate accounts.
B. The balance in the Work in Process account after allocation will be the same under either method.
C. Net operating income will be higher if all of the overapplied manufacturing overhead is closed out to Cost of
Goods Sold.
D. Cost of Goods Sold will be lower if the overapplied manufacturing overhead is closed out by allocating it to
the inventory accounts as well as to Cost of Goods Sold.
28. Overapplied manufacturing overhead occurs when: A. applied overhead exceeds actual overhead.
B. applied overhead exceeds estimated overhead.
C. actual overhead exceeds estimated overhead. D. budgeted overhead exceeds actual overhead.
29. Daguio Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the total estimated manufacturing overhead was $224,580. At the end of the year, actual direct labor-hours for the year were 18,200 hours, manufacturing overhead for the year was underapplied by $12,100, and the actual manufacturing overhead was $219,580. The predetermined overhead rate for the year must have been closest
to:
A. $11.40 per machine-hour B. $12.34 per machine-hour C. $12.06 per machine-hour D. $10.53 per machine-hour
30. Wert Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs. Last year, the company's estimated manufacturing overhead was $1,200,000 and its estimated level of activity was 50,000 direct labor-hours. The company's direct labor wage rate is $12 per hour. Actual manufacturing overhead amounted to $1,240,000, with actual direct labor cost of $650,000. For the year, manufacturing overhead was:
A. overapplied by $60,000
B. underapplied by $60,000
C. overapplied by $40,000
D. underapplied by $44,000
31. Crinks Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the estimated direct labor-hours were 11,200 hours and the total estimated manufacturing overhead was
$259,840. At the end of the year, actual direct labor-hours for the year were 10,800 hours and the actual manufacturing overhead for the year was $254,840. Overhead at the end of the year was:
A. $4,280 overapplied
B. $9,280 overapplied
C. $9,280 underapplied
D. $4,280 underapplied
32. At the beginning of the year, manufacturing overhead for the year was estimated to be $267,500. At the end of the year, actual direct labor-hours for the year were 22,100 hours, the actual manufacturing overhead for the year was $262,500, and manufacturing overhead for the year was overapplied by $13,750. If the predetermined overhead rate is based on direct labor-hours, then the estimated direct labor-hours at the beginning of the year used in the predetermined overhead rate must have been:
A. 22,100 direct labor-hours B. 19,900 direct labor-hours C. 21,000 direct labor-hours D. 21,400 direct labor-hours
33. Brace Corporation uses direct labor-hours in its predetermined overhead rate. At the beginning of the year, the estimated direct labor-hours were 21,600 hours. At the end of the year, actual direct labor-hours for the year were 20,400 hours, the actual manufacturing overhead for the year was $506,920, and manufacturing overhead for the year was underapplied by $23,440. The estimated manufacturing overhead at the beginning of the year used in the predetermined overhead rate must have been:
A. $501,920
B. $531,445
C. $483,480
D. $511,920
34. Yista Corporation uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. The company estimated manufacturing overhead at $510,000 for the year and direct
labor-hours at 100,000 hours. Actual manufacturing overhead costs incurred during the year totaled $540,000. Actual direct labor-hours were 105,000. What was the overapplied or underapplied overhead for the year?
A. $30,000 overapplied
B. $30,000 underapplied
C. $4,500 overapplied
D. $4,500 underapplied
35. Malcolm Company uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs.
,
The cost records for September will show:
A. Overapplied manufacturing overhead of $1,500
B. Underapplied overhead of $1,500
C. Overapplied manufacturing overhead of $3,500
D. Underapplied overhead of $3,500
36. The Work in Process inventory account of a manufacturing firm shows a balance of $3,000 at the end of an accounting period. The job cost sheets of two uncompleted jobs show charges of $500 and $300 for direct materials, and charges of $400 and $600 for direct labor. From this information, it appears that the company is using a predetermined overhead rate, as a percentage of direct labor costs, of:
A. 83% B. 120% C. 40% D. 300%
37. Washtenaw Corporation uses a job-order costing system. The following data are for last year:
,
Washtenaw applies overhead using a predetermined rate based on direct labor-hours. What predetermined overhead rate was used last year?
A. $3.55 per direct labor-hour
B. $3.25 per direct labor-hour
C. $3.08 per direct labor-hour
D. $3.36 per direct labor-hour
38. Capalbo Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year. At the beginning of the most recently completed year, the company estimated the labor-hours for the upcoming year at 52,000 labor-hours. The estimated variable manufacturing overhead was $2.78 per labor-hour and the estimated total fixed manufacturing overhead was $1,192,360. The actual labor-hours for the year
turned out to be 52,600 labor-hours. The predetermined overhead rate for the recently completed year was
closest to: A. $2.78
B. $25.45
C. $25.71
D. $22.93
39. Compton Company uses a predetermined overhead rate in applying overhead to production orders on a labor cost basis in Department A and on a machine-hours basis in Department B. At the beginning of the most recently completed year, the company made the following estimates:
,
What predetermined overhead rate would be used in Department A and Department B, respectively? A. 83% and $5
B. 83% and $3
C. 120% and $3
D. 83% and $120
40. Hayne Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. Data for the most recently completed year appear below:
,
The predetermined overhead rate for the recently completed year was closest to: A. $7.89
B. $30.95
C. $24.52
D. $32.41
41. The Collins Company uses predetermined overhead rates to apply manufacturing overhead to jobs. The predetermined overhead rate is based on labor cost in Dept. A and machine-hours in Dept. B. At the beginning of the year, the company made the following estimates:
,
What predetermined overhead rates would be used in Dept A and Dept B, respectively? A. 71% and $4.00
B. 140% and $4.00
C. 140% and $4.80
D. 71% and $4.80
42. Simoneaux Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. At the beginning of the most recently completed year, the company estimated the
machine-hours for the upcoming year at 22,000 machine-hours. The estimated variable manufacturing overhead
was $8.65 per machine-hour and the estimated total fixed manufacturing overhead was $609,400. The predetermined overhead rate for the recently completed year was closest to:
A. $36.35 per machine-hour
B. $27.70 per machine-hour C. $33.32 per machine-hour D. $8.65 per machine-hour
43. Kelsh Company uses a predetermined overhead rate based on machine-hours to apply manufacturing overhead to jobs. The company has provided the following estimated costs for next year:
,
Kelsh estimates that 5,000 direct labor-hours and 10,000 machine-hours will be worked during the year. The predetermined overhead rate per hour will be:
A. $6.80
B. $6.40
C. $3.40
D. $8.20
44. Kaiser Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. Data for the upcoming year appear below:
,
The predetermined overhead rate for the recently completed year was closest to: A. $6.68
B. $25.02
C. $25.59
D. $18.34
45. The following data have been recorded for recently completed Job 674 on its job cost sheet. Direct materials cost was $2,039. A total of 32 direct labor-hours and 175 machine-hours were worked on the job. The direct labor wage rate is $14 per labor-hour. The company applies manufacturing overhead on the basis of
machine-hours. The predetermined overhead rate is $15 per machine-hour. The total cost for the job on its job cost sheet would be:
A. $2,967
B. $2,487
C. $2,068
D. $5,112
46. Job 731 was recently completed. The following data have been recorded on its job cost sheet:
,
The company applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $14 per machine-hour. The total cost that would be recorded on the job cost sheet for Job 731 would be:
A. $3,288
B. $5,094
C. $4,254
D. $2,418
47. The operations of the Kerry Company resulted in underapplied overhead of $5,000. The entry to close out this balance to Cost of Goods Sold and the effect of the underapplied overhead on Cost of Goods Sold would be:
,
A. Option A B. Option B C. Option C D. Option D
48. Reichelderfer Corporation has provided data concerning the company's Manufacturing Overhead account for the month of August. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $50,000 and the total of the credits to the account was $72,000. Which of the following statements is true?
A. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was
$72,000.
B. Manufacturing overhead applied to Work in Process for the month was $50,000. C. Actual manufacturing overhead for the month was $50,000.
D. Manufacturing overhead for the month was underapplied by $22,000.
49. Hults Corporation has provided data concerning the company's Manufacturing Overhead account for the month of November. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $75,000 and the total of the credits to the account was $57,000. Which of the following statements is true?
A. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was
$75,000.
B. Actual manufacturing overhead incurred during the month was $57,000.
C. Manufacturing overhead applied to Work in Process for the month was $75,000.
D. Manufacturing overhead for the month was underapplied by $18,000.
50. Vandagriff Corporation has provided data concerning the company's Manufacturing Overhead account for the month of June. Prior to the closing of the overapplied or underapplied balance to Cost of Goods Sold, the total of the debits to the Manufacturing Overhead account was $77,000 and the total of the credits to the account was $64,000. Which of the following statements is true?
A. Manufacturing overhead transferred from Finished Goods to Cost of Goods Sold during the month was
$77,000.
B. Manufacturing overhead applied to Work in Process for the month was $64,000. C. Manufacturing overhead for the month was overapplied by $13,000.
D. Actual manufacturing overhead incurred during the month was $64,000.
51. During October, Crusan Corporation incurred $62,000 of direct labor costs and $4,000 of indirect labor costs. The journal entry to record the accrual of these wages would include a:
A. debit to Work in Process of $66,000
B. credit to Work in Process of $66,000
C. debit to Work in Process of $62,000
D. credit to Work in Process of $62,000
52. During December at Ingrim Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $6,000. The journal entry to record the requisition from the storeroom would include a:
A. debit to Raw Materials of $74,000
B. debit to Work in Process of $68,000
C. credit to Manufacturing Overhead of $6,000
D. debit to Work in Process of $74,000
53. Stickles Corporation incurred $79,000 of actual Manufacturing Overhead costs during August. During the same period, the Manufacturing Overhead applied to Work in Process was $75,000. The journal entry to record the incurrence of the actual Manufacturing Overhead costs would include a:
A. debit to Manufacturing Overhead of $79,000
B. credit to Manufacturing Overhead of $79,000
C. credit to Work in Process of $75,000
D. debit to Work in Process of $75,000
54. Valles Corporation had $22,000 of raw materials on hand on February 1. During the month, the company purchased an additional $75,000 of raw materials. The journal entry to record the purchase of raw materials would include a:
A. credit to Raw Materials of $97,000
B. debit to Raw Materials of $97,000
C. credit to Raw Materials of $75,000
D. debit to Raw Materials of $75,000
55. Wedd Corporation had $35,000 of raw materials on hand on May 1. During the month, the co mpany purchased an additional $68,000 of raw materials. During May, $92,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $5,000. The debits to the Work in Process account as a consequence of the raw materials transactions in May total:
A. $92,000
B. $0
C. $68,000
D. $87,000
56. During February, Degan Inc. transferred $60,000 from Work in Process to Finished Goods and recorded a
Cost of Goods Sold of $65,000. The journal entries to record these transactions would include a: A. debit to Finished Goods of $65,000
B. credit to Cost of Goods Sold of $65,000
C. credit to Work in Process of $60,000
D. credit to Finished Goods of $60,000
57. Kirson Corporation incurred $89,000 of actual Manufacturing Overhead costs during December. During the same period, the Manufacturing Overhead applied to Work in Process was $92,000. The journal entry to record the application of Manufacturing Overhead to Work in Process would include a:
A. debit to Manufacturing Overhead of $92,000
B. debit to Work in Process of $89,000
C. credit to Manufacturing Overhead of $92,000
D. credit to Work in Process of $89,000
58. At the beginning of August, Hogancamp Corporation had $26,000 of raw materials on hand. During the month, the company purchased an additional $73,000 of raw materials. During August, $77,000 of raw
materials were requisitioned from the storeroom for use in production. The credits to the Raw Materials account for the month of August total:
A. $73,000
B. $77,000
C. $99,000
D. $26,000
59. During July at Tiner Corporation, $74,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled
$7,000. The journal entry to record this requisition would include a debit to Manufacturing Overhead of: A. $0
B. $74,000
C. $7,000
D. $67,000
60. On February 1, Caddell Corporation had $28,000 of raw materials on hand. During the month, the company purchased an additional $70,000 of raw materials. During February, $81,000 of raw materials were
requisitioned from the storeroom for use in production. The debits to the Raw Materials account for the month
of February total: A. $98,000
B. $70,000
C. $28,000
D. $81,000
61. In May, Hervey Inc. incurred $60,000 of direct labor costs and $3,000 of indirect labor costs. The journal entry to record the accrual of these wages would include a:
A. credit to Manufacturing Overhead of $3,000
B. debit to Work in Process of $63,000
C. credit to Work in Process of $63,000
D. debit to Manufacturing Overhead of $3,000
62. The Donaldson Company uses a job-order costing system. The following data were recorded for July:
,
Overhead is applied to jobs at the rate of 80% of direct materials cost. Jobs 475, 477, and 478 were completed during July and transferred to finished goods. Jobs 475 and 478 have been delivered to the customer. Donaldson's Work in Process inventory balance on July 31 was:
A. $7,280
B. $2,600
C. $3,160
D. $3,320
63. Pinnini Co. uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. Last year, Pinnini Company incurred $225,000 in actual manufacturing overhead cost. The Manufacturing Overhead account showed that overhead was overapplied $14,500 for the year. If the predetermined overhead rate was $5.00 per direct labor-hour, how many hours did the company work during the year?
A. 45,000 hours
B. 47,900 hours C. 42,100 hours D. 44,000 hours
64. Dowan Company uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs. Last year Dowan Company incurred $156,600 in actual manufacturing overhead cost. The Manufacturing Overhead account showed that manufacturing overhead was underapplied by $12,600 for the year. If the predetermined overhead rate is $6.00 per direct labor-hour, how many hours did the company work during the year?
A. 26,000 hours
B. 24,000 hours C. 28,200 hours D. 25,000 hours
65. Kelson Company applies overhead to jobs on the basis of 60% of direct labor cost. If Job 201 shows
$27,000 of manufacturing overhead applied, the direct labor cost on the job was: A. $16,200
B. $27,000
C. $37,800
D. $45,000
66. The following accounts are from last year's books at Sharp Manufacturing:
,
Sharp uses job-order costing and applies manufacturing overhead to jobs based on direct labor costs. What is the amount of cost of goods manufactured for the year?
A. $252,000
B. $227,000
C. $230,000
D. $255,000
67. Jurper Corporation used $150,000 of direct materials during April. At the end of April, Jurper's direct materials inventory was $25,000 more than it was at the beginning of the month. Direct materials purchases during the April amounted to:
A. $0
B. $125,000
C. $150,000
D. $175,000
68. Botton Inc. has provided the following data for the month of March. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $7,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in pro cess, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The cost of goods sold for March after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $163,490
B. $177,490
C. $165,030
D. $175,950
69. Desrevisseau Inc., a manufacturing company, has provided the following data for the month of August. The balance in the Work in Process inventory account was $10,000 at the beginning of the month and $22,000 at the end of the month. During the month, the company incurred direct materials cost of $63,000 and direct labor cost of $39,000. The actual manufacturing overhead cost incurred was $40,000. The manufacturing overhead cost applied to Work in Process was $43,000. The cost of goods manufactured for August was:
A. $133,000
B. $142,000
C. $145,000
D. $130,000
70. Under Lamprey Company's job-order costing system, manufacturing overhead is applied to Work in Process inventory using a predetermined overhead rate. During January, Lamprey's transactions included the following:
,
Lamprey Company had no beginning or ending inventories. What was the cost of goods manufactured for
January?
A. $302,000
B. $310,000
C. $322,000
D. $330,000
71. Delhoyo Corporation, a manufacturing company, has provided data concerning its operations for September. The beginning balance in the raw materials account was $37,000 and the ending balance was $29,000. Raw materials purchased during the month totaled $57,000. Manufacturing overhead cost incurred during the month was $102,000, of which $2,000 consisted of raw materials classified as indirect materials. The direct materials cost for September was:
A. $63,000
B. $57,000
C. $65,000
D. $49,000
72. Gest Inc. has provided the following data for the month of November. The balance in the Finished Goods inventory account at the beginning of the month was $49,000 and at the end of the month was $45,000. The cost of goods manufactured for the month was $226,000. The actual manufacturing overhead cost incurred was
$74,000 and the manufacturing overhead cost applied to Work in Process was $70,000. The adjusted cost of
goods sold that would appear on the income statement for November is: A. $226,000
B. $230,000
C. $222,000
D. $234,000
73. Dydell Inc. has provided the following data for the month of December. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $7,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The finished goods inventory at the end of December after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $27,498
B. $30,220
C. $30,282
D. $27,560
74. Lyster Inc. has provided the following data for the month of August. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $1,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The work in process inventory at the end of August after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $5,650
B. $5,645
C. $5,570
D. $5,575
75. Minturn Inc. has provided the following data for the month of September. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $2,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
September would include the following: A. debit to Work in Process of $120
B. credit to Work in Process of $15,800
C. debit to Work in Process of $15,800
D. credit to Work in Process of $120
76. Graeser Inc. has provided the following data for the month of May. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $4,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for May
would include the following:
A. credit to Cost of Goods Sold of $100,110
B. credit to Cost of Goods Sold of $2,520
C. debit to Cost of Goods Sold of $2,520
D. debit to Cost of Goods Sold of $100,110
77. The actual manufacturing overhead incurred at Hogans Corporation during April was $59,000, while the manufacturing overhead applied to Work in Process was $74,000. The company's Cost of Goods Sold was
$289,000 prior to closing out its Manufacturing Overhead account. The company closes out its Manufacturing
Overhead account to Cost of Goods Sold. Which of the following statements is true?
A. Manufacturing overhead was overapplied by $15,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $274,000
B. Manufacturing overhead was underapplied by $15,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $274,000
C. Manufacturing overhead was overapplied by $15,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $304,000
D. Manufacturing overhead was underapplied by $15,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $304,000
78. Sharp Company's records show that overhead was overapplied by $10,000 last year. This overapplied manufacturing overhead was closed out to the Cost of Goods Sold account at the end of the year. In trying to determine why overhead was overapplied by such a large amount, the company has discovered that $6,000 of depreciation on factory equipment was charged to administrative expense in error. Given the above information, which of the following statements is true?
A. Manufacturing overhead was actually overapplied by $16,000 for the year. B. The company's net income is understated by $6,000 for the year.
C. Under the circumstances posed above, the error in recording depreciation would have no effect on net operating income for the year.
D. The $6,000 in depreciation should have been charged to Work in Process rather than to administrative expense.
79. Caryl Inc. has provided the following data for the month of March. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $10,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
March would include the following:
A. credit to Finished Goods of $900
B. debit to Finished Goods of $29,200
C. credit to Finished Goods of $29,200
D. debit to Finished Goods of $900
80. Lietz Corporation has provided the following data concerning manufacturing overhead for January:
,
The company's Cost of Goods Sold was $369,000 prior to closing out its Manufacturing Overhead account. The company closes out its Manufacturing Overhead account to Cost of Goods Sold. Which of the following statements is true?
A. Manufacturing overhead was underapplied by $23,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $392,000
B. Manufacturing overhead was underapplied by $23,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $346,000
C. Manufacturing overhead was overapplied by $23,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $346,000
D. Manufacturing overhead was overapplied by $23,000; Cost of Goods Sold after closing out the
Manufacturing Overhead account is $392,000
Bakker Corporation applies manufacturing overhead on the basis of direct labor-hours. At the beginning of the most recent year, the company based its predetermined overhead rate on total estimated overhead of $77,250 and 2,500 estimated direct labor-hours. Actual manufacturing overhead for the year amounted to $79,000 and actual direct labor-hours were 2,400.
81. The predetermined overhead rate for the year was closest to: A. $29.66
B. $32.92
C. $31.60
D. $30.90
82. The applied manufacturing overhead for the year was closest to: A. $74,160
B. $71,184
C. $75,840
D. $79,008
83. The overhead for the year was: A. $3,090 overapplied
B. $4,840 underapplied
C. $4,840 overapplied
D. $3,090 underapplied
Acitelli Corporation, which applies manufacturing overhead on the basis of machine-hours, has provided the following data for its most recent year of operations.
,
The estimates of the manufacturing overhead and of machine-hours were made at the beginning of the year for the purpose of computing the company's predetermined overhead rate for the year.
84. The predetermined overhead rate is closest to: A. $42.30
B. $41.82
C. $42.12
D. $42.00
85. The applied manufacturing overhead for the year is closest to: A. $357,979
B. $360,547
C. $359,520
D. $362,088
86. The overhead for the year was: A. $1,520 underapplied
B. $2,520 overapplied
C. $1,520 overapplied
D. $2,520 underapplied
Carter Corporation applies manufacturing overhead on the basis of machine-hours. At the beginning of the most recent year, the company based its predetermined overhead rate on total estimated overhead of $135,850. Actual manufacturing overhead for the year amounted to $145,000 and actual machine-hours were 5,660. The company's predetermined overhead rate for the year was $24.70 per machine-hour.
87. The predetermined overhead rate was based on how many estimated machine-hours? A. 5,870
B. 5,500
C. 6,081
D. 5,660
88. The applied manufacturing overhead for the year was closest to: A. $135,850
B. $149,218
C. $143,869
D. $139,802
89. The overhead for the year was: A. $5,198 overapplied
B. $3,952 underapplied
C. $3,952 overapplied
D. $5,198 underapplied
Snappy Company has a job-order costing system and uses a predetermined overhead rate based on direct
labor-hours to apply manufacturing overhead to jobs. Manufacturing overhead cost and direct labor hours were estimated at $100,000 and 40,000 hours, respectively, for the year. In July, Job #334 was completed at a cost of
$5,000 in direct materials and $2,400 in direct labor. The labor rate is $6 per hour. By the end of the year Snappy had worked a total of 45,000 direct labor-hours and had incurred $110,250 actual manufacturing overhead cost.
90. If Job #334 contained 200 units, the unit product cost on the completed job cost sheet would be: A. $37.00
B. $42.00
C. $41.90
D. $39.50
91. Snappy's manufacturing overhead for the year was: A. $10,250 underapplied
B. $12,500 overapplied
C. $12,500 underapplied
D. $2,250 overapplied
Lund Company applies manufacturing overhead to jobs using a predetermined overhead rate of 75% of direct labor cost. Any underapplied or overapplied manufacturing overhead cost is closed out to Cost of Goods Sold at the end of the month. During March, the following transactions were recorded by the company:
,
,92. The amount of direct materials cost in the March 31 Work in Process invento ry account was: A. $5,250
B. $3,500
C. $9,000
D. $8,750
93. The Cost of Goods Manufactured for March was: A. $66,500
B. $61,500
C. $59,500
D. $63,000
94. The entry to dispose of the underapplied or overapplied manufacturing overhead cost for the month would include:
A. a credit of $2,000 to Cost of Goods Sold.
B. a debit of $5,000 to the Cost of Goods Sold.
C. a debit of $5,000 to the Manufacturing Overhead account. D. a credit of $2,000 to the Manufacturing Overhead account.
95. The balance on March 1 in the Raw Materials inventory account was: A. $8,500
B. $6,500
C. $7,500
D. $9,500
On April 1, Bogdon Corporation had $30,000 of raw materials on hand. During t he month, the company purchased an additional $63,000 of raw materials. During April, $76,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $2,000.
96. The journal entry to record the purchase of raw materials would include a: A. debit to Raw Materials of $63,000
B. credit to Raw Materials of $63,000
C. credit to Raw Materials of $93,000
D. debit to Raw Materials of $93,000
97. The journal entry to record the requisition from the storeroom would include a: A. debit to Raw Materials of $76,000
B. debit to Work in Process of $76,000
C. credit to Manufacturing Overhead of $2,000
D. debit to Work in Process of $74,000
On April 1, Stelter Corporation had $34,000 of raw materials on hand. During the month, the company purchased an additional $60,000 of raw materials. During April, $70,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $7,000. Prepare journal entries to record these events. Use these journal entries to answer the following questions:
98. The debits to the Raw Materials account for the month of April total: A. $94,000
B. $70,000
C. $60,000
D. $34,000
99. The credits to the Raw Materials account for the month of April total: A. $94,000
B. $34,000
C. $70,000
D. $60,000
100. The debits to the Work in Process account as a consequence of the raw materials transactions in April total:
A. $60,000
B. $0
C. $70,000
D. $63,000
101. The credits to the Work in Process account as a consequence of the raw materials transactions in Apr il total:
A. $70,000
B. $63,000
C. $0
D. $60,000
102. The debits to the Manufacturing Overhead account as a consequence of the raw materials transactions in
April total: A. $7,000
B. $63,000
C. $0
D. $70,000
103. The credits to the Manufacturing Overhead account as a consequence of the raw materials transactions in
April total: A. $0
B. $70,000
C. $63,000
D. $7,000
During September, Stutzman Corporation incurred $86,000 of actual Manufacturing Overhead costs. During the same period, the Manufacturing Overhead applied to Work in Process was $81,000.
104. The journal entry to record the incurrence of the actual Manufacturing Overhead costs would include a: A. credit to Manufacturing Overhead of $86,000
B. debit to Manufacturing Overhead of $86,000
C. credit to Work in Process of $81,000
D. debit to Work in Process of $81,000
105. The journal entry to record the application of Manufacturing Overhead to Work in Process would include a:
A. credit to Manufacturing Overhead of $81,000
B. credit to Work in Process of $86,000
C. debit to Manufacturing Overhead of $81,000
D. debit to Work in Process of $86,000
Daane Company had only one job in process on May 1. The job had been charged with $1,000 of direct materials, $3,302 of direct labor, and $5,382 of manufacturing overhead cost. The company assigns overhead cost to jobs using the predetermined overhead rate of $20.70 per direct labor-hour.
During May, the following activity was recorded:
,
Work in process inventory on May 30 contains $2,921 of direct labor cost. Raw materials consist solely of items that are classified as direct materials.
106. The amount of direct materials cost in the May 30 work in process inventory account was: A. $5,680
B. $19,900
C. $8,400
D. $11,500
107. The cost of goods manufactured for May was: A. $78,500
B. $78,100
C. $77,150
D. $74,822
108. The entry to dispose of the underapplied or overapplied manufacturing overhead cost for the month would include a:
A. debit of $1,350 to Manufacturing Overhead.
B. credit of $4,761 to Manufacturing Overhead. C. credit of $1,350 to Manufacturing Overhead. D. debit of $4,761 to Manufacturing Overhead.
The following partially completed T-accounts summarize the transactions of Belson Company for last year:
,
At the end of the year, the company closes out the balance in the Manufacturing Overhead account to Cost of
Goods Sold.
109. The indirect labor cost is: A. $6,000
B. $13,000
C. $16,000
D. $31,000
110. The cost of goods sold (after adjustment for underapplied or overapplied manufacturing overhead) is: A. $61,000
B. $62,000
C. $63,000
D. $64,000
111. The manufacturing overhead applied is: A. $28,000
B. $29,000
C. $30,000
D. $38,000
112. The cost of direct materials used in production is: A. $12,000
B. $13,000
C. $16,000
D. $20,000
Entin Corporation reported the following data for the month of January:
,
113. The direct materials cost for January is: A. $59,000
B. $56,000
C. $71,000
D. $65,000
114. The cost of goods manufactured for January is: A. $202,000
B. $214,000
C. $217,000
D. $199,000
115. The adjusted cost of goods sold that appears on the income statement for January is: A. $197,000
B. $200,000
C. $201,000
D. $199,000
Vanwagenen Inc. has provided the following data for the month of April:
,
,116. The cost of goods manufactured for April is: A. $198,000
B. $201,000
C. $197,000
D. $202,000
117. The adjusted cost of goods sold that appears on the income statement for April is: A. $197,000
B. $195,000
C. $200,000
D. $199,000
Leija Manufacturing Company uses a job-order costing system and started the month of March with one job in process (Job #359). This job had $500 of cost assigned to it at this time. During March, Leija assigned production costs as follows to the jobs worked on during the month:
,
During March, Leija completed and sold Job #359. Job #360 was also completed but was not sold by month end. Job #361 was not completed by the end of March.
118. What is Leija's cost of goods manufactured for March? A. $6,500
B. $14,100
C. $14,600
D. $16,500
119. What is Leija's work in process inventory balance at the end of March? A. $1,900
B. $2,400
C. $2,900
D. $10,000
Echenko Corporation uses a job-order costing system and applies overhead to jobs using a predetermined overhead rate. During the year the company's Finished Goods inventory account was debited for $380,000 and credited for $335,500. The ending balance in the Finished Goods inventory account was $62,300. At the end of the year, manufacturing overhead was overapplied by $2,900.
120. The balance in the Finished Goods inventory account at the beginning of the year was: A. $2,900
B. $62,300
C. $44,500
D. $17,800
121. If the applied manufacturing overhead was $70,400, the actual manufacturing overhead cost for the year was:
A. $73,300
B. $67,500
C. $129,800
D. $85,300
The following partially completed T-accounts summarize transactions for Fabatz Company during the year:
,
122. The Cost of Goods Manufactured was: A. $23,800
B. $5,400
C. $22,600
D. $46,400
123. The direct labor cost was: A. $8,700
B. $12,000
C. $11,700
D. $14,200
124. The direct materials cost was: A. $3,300
B. $8,700
C. $6,300
D. $7,300
125. The manufacturing overhead applied was: A. $2,200
B. $3,000
C. $5,800
D. $13,900
126. The manufacturing overhead was: A. $2,200 underapplied
B. $2,200 overapplied
C. $400 overapplied
D. $400 underapplied
Staniszewski Inc. has provided the following data for the month of March. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $1,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
127. The cost of goods sold for March after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $229,940
B. $231,560
C. $231,750
D. $229,750
128. The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
March would include the following:
A. credit to Finished Goods of $38,780
B. debit to Finished Goods of $38,780
C. credit to Finished Goods of $140
D. debit to Finished Goods of $140
Lenci Inc. has provided the following data for the month of May. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $3,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the
month in those accounts.
129. The work in process inventory at the end of May after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $12,710
B. $12,732
C. $12,928
D. $12,950
130. The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
May would include the following:
A. debit to Cost of Goods Sold of $340,580
B. credit to Cost of Goods Sold of $2,580
C. credit to Cost of Goods Sold of $340,580
D. debit to Cost of Goods Sold of $2,580
Joens Inc. has provided the following data for the month of July. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $2,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
131. The cost of goods sold for July after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $51,320
B. $47,320
C. $50,280
D. $48,360
132. The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
July would include the following:
A. debit to Work in Process of $360
B. credit to Work in Process of $360
C. credit to Work in Process of $12,250
D. debit to Work in Process of $12,250
McWhite Inc. has provided the following data for the month of October. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $6,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
133. The finished goods inventory at the end of October after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $60,820
B. $58,660
C. $58,648
D. $60,832
134. The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
October would include the following:
A. debit to Cost of Goods Sold of $262,920
B. credit to Cost of Goods Sold of $262,920
C. debit to Cost of Goods Sold of $4,800
D. credit to Cost of Goods Sold of $4,800
Denherder Inc. has provided the following data for the month of November. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $5,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the
month in those accounts.
135. The finished goods inventory at the end of November after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $50,840
B. $50,848
C. $52,632
D. $52,640
136. The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
November would include the following: A. credit to Work in Process of $250
B. debit to Work in Process of $11,200
C. credit to Work in Process of $11,200
D. debit to Work in Process of $250
Gressett Inc. has provided the following data for the month of April. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $6,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
137. The work in process inventory at the end of April after allocation of any underapplied or overapplied manufacturing overhead for the month is closest to:
A. $4,050
B. $4,081
C. $4,259
D. $4,290
138. The journal entry to record the allocation of any underapplied or overapplied manufacturing overhead for
April would include the following:
A. debit to Finished Goods of $44,280
B. credit to Finished Goods of $960
C. debit to Finished Goods of $960
D. credit to Finished Goods of $44,280
139. Alam Company is a manufacturing firm that uses job-order costing. At the beginning of the year, the company's inventory balances were as follows:
,
The company applies overhead to jobs using a predetermined overhead rate based on machine-hours. At the beginning of the year, the company estimated that it would work 45,000 machine-hours and incur $180,000 in manufacturing overhead cost. The following transactions were recorded for the year:
,a. Raw materials were purchased, $416,000.
b. Raw materials were requisitioned for use in production, $420,000 ($380,000 direct and $40,000 indirect). c. The following employee costs were incurred: direct labor, $414,000; indirect labor, $60,000; and
administrative salaries, $212,000. d. Selling costs, $141,000.
e. Factory utility costs, $20,000.
f. Depreciation for the year was $81,000 of which $73,000 is related to factory operations and $8,000 is related
to selling, general, and administrative activities.
g. Manufacturing overhead was applied to jobs. The actual level of activity for the year was 48,000
machine-hours.
h. The cost of goods manufactured for the year was $1,004,000.
i. Sales for the year totaled $1,416,000 and the costs on the job cost sheets of the goods that were sold totaled
$989,000.
j. The balance in the Manufacturing Overhead account was closed out to Cost of Goods Sold.
,Required:
,Prepare the appropriate journal entry for each of the items above (a. through j.). You can assume that all transactions with employees, customers, and suppliers were conducted in cash.
140. Babb Company is a manufacturing firm that uses job-order costing. The company's inventory balances were as follows at the beginning and end of the year:
,
The company applies overhead to jobs using a predetermined overhead rate based on machine-hours. At the beginning of the year, the company estimated that it would work 17,000 machine-hours and incur $272,000 in manufacturing overhead cost. The following transactions were recorded for the year:
,•Raw materials were purchased, $416,000.
•Raw materials were requisitioned for use in production, $412,000 $(376,000 direct and $36,000 indirect).
•The following employee costs were incurred: direct labor, $330,000; indirect labor, $69,000; and administrative salaries, $157,000.
•Selling costs, $113,000.
•Factory utility costs, $29,000.
•Depreciation for the year was $121,000 of which $114,000 is related to factory operations and $7,000 is related to selling, general, and administrative activities.
•Manufacturing overhead was applied to jobs. The actual level of activity for the year was 15,000 machine-hours.
• Sales for the year totaled $1,282,000. Required:
a. Prepare a schedule of cost of goods manufactured in good form. b. Was the overhead underapplied or overapplied? By how much?
c. Prepare an income statement for the year in good form. The company closes any underapplied or overapplied
manufacturing overhead to Cost of Goods Sold.
141. Sandler Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year. Data for the upcoming year appear below:
,
Required:
,Compute the company's predetermined overhead rate.
142. Wahr Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year. At the beginning of the most recently completed year, the company estimated the labor-hours for the upcoming year at 32,000 labor-hours. The estimated variable manufacturing overhead was $7.17 per labor-hour and the estimated total fixed manufacturing overhead was $584,320. The actual labor-hours for the year turned out to be 33,300 labor-hours.
,Required:
,Compute the company's predetermined overhead rate for the recently completed year.
143. Escatel Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year. Data for the most recently completed year appear below:
,
Required:
,Compute the company's predetermined overhead rate for the recently completed year.
144. Dobrinski Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year. At the beginning of the most recently completed year, the company estimated the labor-hours for the upcoming year at 13,000 labor-hours. The estimated variable manufacturing overhead was $2.35 per labor-hour and the estimated total fixed manufacturing overhead was $156,130.
,Required:
,Compute the company's predetermined overhead rate.
145. The following accounts will be used in this problem:
,A. Raw materials inventory
B. Accounts payable
C. Cost of goods sold
D. Work in process inventory
E. Manufacturing overhead
F. Wages and salaries expense
G. Accumulated depreciation
H. Depreciation expense
I. Finished goods inventory
J. Wages and salaries payable
K. Prepaid insurance
L. Insurance expense
,Required:
,Enter identifying letters in the blanks below to indicate the accounts debited and credited under a job-order costing system for each of the following summary transactions:
,
146. During June, Catlin Corporation purchased $76,000 of raw materials on credit to add to its raw materials inventory. A total of $81,000 of raw materials was requisitioned from the storeroom for use in production. These requisitioned raw materials included $5,000 of indirect materials.
,Required:
,Prepare journal entries to record the purchase of materials and their use in production.
147. Glen Lake Corporation recorded the following transactions for the just completed month:
a. $60,000 in raw materials were purchased on account.
b. $51,000 in raw materials were requisitioned for use in production. Of this amount, $42,000 was for direct materials and the remainder was for indirect materials.
c. Total labor wages of $92,000 were incurred and paid. Of this amount, $81,000 was for direct labor and the remainder was for indirect labor.
d. Additional manufacturing overhead cost of $155,000 were incurred. All were on account. Required:
Record the above transactions in journal entries.
148. During August, Allee Corporation incurred $64,000 of actual Manufacturing Overhead costs. During the same period, the Manufacturing Overhead applied to Work in Process was $66,000.
,Required:
,Prepare journal entries to record the incurrence of manufacturing overhead and the application of manufacturing overhead to Work in Process.
149. The following cost data relate to the manufacturing activities of Newberry Company during the just completed year:
,
The company uses a predetermined overhead rate to apply manufacturing overhead cost to production. The predetermined overhead rate for the year was $15 per machine-hour. A total of 23,000 machine-hours were recorded for the year.
,Required:
,a. Compute the amount of underapplied or overapplied manufacturing overhead cost for the year. b. Prepare a Schedule of Cost of Goods Manufactured for the year.
150. Job 434 was recently completed. The following data have been recorded on its job cost sheet:
,
The company applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $12 per machine-hour.
,Required:
,Compute the unit product cost that would appear on the job cost sheet for this job.
151. Job 599 was recently completed. The following data have been recorded on its job cost sheet:
,
The company applies manufacturing overhead on the basis of direct labor-hours. The predetermined overhead rate is $20 per direct labor-hour.
,Required:
,Compute the unit product cost that would appear on the job cost sheet for this job.
152. Shapiro Corporation has provided the following data for the most recent month:
,
Required:
,Prepare T-accounts for Raw Materials, Work in Process, Finished Goods, Manufacturing Overhead, and Cost of Goods Sold. Record the beginning balances and each of the transactions listed above. Finally, determine the ending balances.
153. Goodenough Inc. has provided the following data for August:
,
Required:
,Prepare T-accounts for Raw Materials, Work in Process, Finished Goods, and Manufacturing Overhead, and Cost of Goods Sold. Record the beginning balances and each of the transactions listed above. Finally, determine the ending balances.
154. During September, Paliotta Corporation recorded the following:
,
Required:
,Prepare T-accounts for Raw Materials, Work in Process, Finished Goods, and Manufacturing Overhead, and Cost of Goods Sold. Record the beginning balances and each of the transactions listed above. Finally, determine the ending balances.
155. Hirschman Corporation has provided the following data for the month of April:
,
Required:
,Prepare a Schedule of Cost of Goods Manufactured and a Schedule of Cost of Goods Sold in good form.
156. Straley Inc. has provided the following data for the month of February. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was overapplied by $3,000.
The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the
month in those accounts. Required:
Provide the journal entry that would record the allocation of underapplied or overapplied among work in process, finished goods, and cost of goods sold.
157. Alvardo Inc. has provided the following data for the month of November. There were no beginning inventories; consequently, the direct materials, direct labor, and manufacturing overhead applied listed below are all for the current month.
,
Manufacturing overhead for the month was underapplied by $6,000.
,The company allocates any underapplied or overapplied manufacturing overhead among work in process, finished goods, and cost of goods sold at the end of the month on the basis of the overhead applied during the month in those accounts.
,Required:
,Determine the cost of work in process, finished goods, and cost of goods sold AFTER allocation of the underapplied or overapplied manufacturing overhead for the period.
158. A number of companies in different industries are listed below:
,1. Elevator production and installation company
2. Cattle feedlot that fattens cattle prior to slaughter
3. Brick manufacturer
4. Architectural firm that designs custom homes
5. Winery that produces a number of varietal wines
6. Synthetic rubber manufacturer
,Required:
,For each company, indicate whether the company is most likely to use job-order costing or process costing.
159. Some companies use process costing and some use job-order costing. Which method a company uses depends on its industry? A number of companies in different industries are listed below:
,1. Contract water drilling company
2. Commercial photographer
3. Tortilla manufacturer
4. Electric utility
5. Mushroom farm that produces the standard button mushroom in caves
,Required:
,For each company, indicate whether the company is most likely to use job-order costing or process costing.
160. Whether a company uses process costing or job-order costing depends on its industry. A number of companies in different industries are listed below:
,1. Dairy farm
2. Custom boat builder
3. Food caterer that supplies food for wedding and other special events
4. Advertising agency
5. Coal mining company
6. Cattle feedlot that fattens cattle prior to slaughter
,Required:
,For each company, indicate whether the company is most likely to use job-order costing or process costing.
